There are numerous brands of self tanners, but while they all have DHA as their active ingredients, their application processes are slightly different.
This is why we usually tell you to read and follow the application instructions on your self tanner. In addition to that, we also educate our readers on how to use different self tanning products. On that note, we created this article exclusively for Fake Bake Flawless Darker.
Take the time to read the steps below. You can only get great results if you apply it the right way. Also, there are several mistakes that users make, and they(mistakes) end up giving them stains, orange skin, streaks, blotches, or uneven patches.
To avoid all the unpleasant self tan results, you must follow the steps discussed right below. Also, we need to remind you that we have tested this product on several people, and the results were great. Don’t think we are promoting the product because we are affiliated with the brand.
No, we only review, promote, or introduce only the products that have impressed us, and all Fake Bake products have done creditably well. When you try this particular product, you’ll realize that what we have said about the product is true. Let’s get started.
How To Use Fake Bake Flawless Darker? 6 Easy Steps
To apply the product, you must follow the steps below to achieve a great tan.
Step 1- Check The Application Instructions
Before using any skincare product, you need to study the instructions given by the manufacturer. It is necessary to follow the instructions. If you don’t follow the instructions and something goes wrong, you can’t blame the product, and neither can you conclude that the product does not work.
Step 2 – Shave Your Hair
This is necessary for all self tanners. This is because the hair prevents self tanners from penetrating the skin faster. So, you need to shave it off to pave the way for the self tanner to get into your skin faster. At this juncture, we’d like to warn you not to shave your hair and apply the tanner on the same day. That way, you’re likely to end up with clogged pores because the pores open up after shaving.
So, what should you do? You can shave your hair a day or two before you apply your self tanner to your skin. By then, your pores would have reduced, and that decreases the chances of having your self tanner in them.
Step 3 – Exfoliate Your Skin Too
After shaving your hair, we’ll advise you to exfoliate your skin too. First, dead skin cells and impurities prevent the tanner from reaching its full potential. Also, layers of dead cells peel off on their own after a couple of days.
If you don’t exfoliate your skin, you’ll end up tanning the layer of dead cells that will peel off 2 to 3 days after. And when it does, your tan will go with it, making you lose your tan sooner than you should. That’s why you need to exfoliate your skin. You need to self tan the freshest layer of skin because it will last longer.
Step 4 – Apply The Tanner
Now, you can apply the tanner to your skin. We’re glad that the product comes with an application mitt. So, put on your gloves, and use the mitt to apply the tanner to your body. Spray it on the mitt slightly, and run it on your legs. Remember, women will be in their bikinis while men will be in their panties before they apply it.
You need to apply it to every part of your body. Rub it all over your lap, and go down to the foot. Rub it in long streaks. Take the time to apply it to all your toes and the spaces between them. Then move to the second leg. Do the same to the second leg.
Gently move to your abdomen and chest. After that, you can apply it to your back. We think it is better for a friend to apply it to your back. After the back, go to your neck and then to your face. Finally, remove your gloves so that you can apply it to your hands. Wear the mitt on the right hand, and use the mitt to apply it to the left hand. When you’re through, you can do the reverse.
Step 5 – Wait For It To Dry And Develop
The product takes about 15 to 30 minutes to dry, but it takes 6 to 8 hours to develop fully. So, you can wear loose clothes after 30 minutes, but you must wait for at least 6 hours for the tanner to develop before you can take a shower and wear tight clothes.
Step 6 – Apply A Moisturizer
Apply a moisturizer the following day. In fact, you must moisturize your skin every day to maintain your tan.
How Long Do You Leave Fake Bake Flawless Darker On For?
You can leave it on for at least 6 hours before you wear tight clothes and begin to take your shower. It takes up to 6 hours to develop fully. After it develops, it will not stain your clothes or wash off easily. After 6 hours, you can rub a piece of cloth on your body to see if there’ll be a stain. If there’s no stain, it means the tanner has developed fully.
Can You Use Fake Bake Flawless Darker On Your Face?
Yes, you can apply the tanner to your face. It is stated in the steps discussed above. Furthermore, you can apply all Fake Bake self tanners to your face. However, there are certain tanners and bronzers meant specifically for the face. You might get a better facial glow if you apply any of the face tanners to your face. But in their absence, Fake Bake Flawless Darker will do a good job on the face.
How Long Should I Wait To Shower After Using Fake Bake?
You must wait for at least 6 hours before you take a shower. The product takes about 6 to 8 hours to develop. If you take a shower a little earlier, you risk washing the tan off. And it could leave you with uneven patches of tanner. You don’t want to be called an oompa loompa.
Final Thoughts
We have tested Fake Bake Flawless Darker, and we can assure you that it is a great product and will give you a great tan. However, you must follow the procedure discussed above to get the best results. Also, it has no smell, and it does not leave any streaks, blotches, or orange skin. So, we recommend it.