Do you know why celebrities like Kylie Jenner chose Bondi Sands Self-Tanning Foams as their favorite? It’s because it has an incomparable market value.
The product has gone from a newly-released self-tanning cosmetic to a model to other skincare products with its proven and working features. It features significant ingredients that would replenish the splendor of your skin.
Organic ingredients used for this variety are avocado, Aloe Vera, cocoa butter, Vitamin E, and antioxidants. Unlike many other products in the marketplace, this features a fuss-free application. And the proper application of the self-tanner on the skin would definitely be streak-free.
This, at least, would save you from quite a lot of hassles and misapplications. But know beforehand that this product features based tanning. So, it’s apparently what you should be applying on a daily basis to attain the skin glow you desire.
Peradventure you’ve read a user guide before now, then you should still read this. Why? There are some vital clues we’ve got for you. You can just check them out below:
How To Use Bondi Sands Self-Tanning Foam:
1. Preparation
The ultimate thing required of any enthusiast is to buy a perfect product for one’s skin tone. You can find it for light/medium and ultra-dark skin tones. The result will be empirical and faster compared to using any other.
It’s after buying a product that one can be sure that the goal actualization is halfway done. Then, one can move on to get an applicator mitt. The essence of the mitt is to aid you in applying the self-tanning substance on your skin awesomely.
Once all these are ready, there is a need for one to bathe before applying the product. If one is using the skincare for the first time, there is no need to consider the second point but jump over to the third point.
2. Exfoliate Your Skin
This ought to be done when one is bathing – it’s more convenient that way. That’s the perfect time you can shave and exfoliate. Get good instruments that you can use to achieve that.
Nonetheless, you’d need to immerse yourself in warm water in your bathtub. Get a sponge and soap to scrub off the dead cells from your skin. It’s not what you should be hurry about. Instead, be patient with all this process so that you can get a splendid result.
While you’re exfoliating your face, you can shave your legs. It’s after you’re done that you can rinse the residue off your skin. People who use it daily or between the interval of two days don’t have to exfoliate every time they are about to apply it.
3. Wearing An Applicator Mitt
- Use your towel to clean the dabs of water from your skin. Wipe off the water from the top of your body down to your leg.
- Please put on the applicator mitt on your hand while you paste the self-tanning foam on it. However, you’d need to make sure that you clean the applicator mitt so well before reusing it.
- Doing that would prepare the mitt to work effectively in the even distribution of the foam on your skin.
- In addition, we advise that you buy an applicator mitt that Bondi Sands make. That’s another way of getting an expected result.
4. Application Of The Bondi Sands Self-Tanning Foam
- Paste the self-tanning foam on the mitt. However, ensure that the mitt has a dry surface before you paste the self-tanning substance.
- Start from your legs straight to your face. Nonetheless, the process would still have to be gradual.
- So, having pasted the self-tanning foam on the mitt, one should rub it on one skin in a circular motion so that it can penetrate through the skin pores. Remember that the reaction only occurs at the upper layer of one’s skin.
- Be precise with the quantity of foam you apply on your mitt so that you can consciously administer the skincare on every part of your body.
- Another person should help you in applying the self-tanning foam to your back.
5. Applying Bondi Sands Self-Tanning Foam On Your Face
Paste a little quantity on your mitt since it would have absorbed an enormous amount already. Use the glove to rub the foam in a circular motion to your cheeks straight down to your jaw and your neck.
You could stay at the front of a mirror to observe your exercise as you indulge in the act. Nevertheless, it would be excellent if the substance is evenly distributed on your face.
You don’t have to rub it on your head. Instead, you can use other alternatives to darken your hair. Once you’re done, then you’re good to go as the hydration of Bondi Sands Self-Tanning Foam is pretty fast.
6. Precautions To Consider Before And During Tanning
Ensure that you apply Vaseline on the thicker part of your flesh, such as the knees, knuckles, elbows, and so on, before you begin the application of the self-tanner.
That’s the sole way you can trap tans on those spots so that you can scoop an effective result. Also, you’d need to cover your feet and hands before tanning so that you won’t stain them and get them tanned eventually.
And constantly check the mitt to see if it tightens your hand wrist properly. In case it doesn’t, you can use a binding tape to tighten the last end to your hand wrist.
7. Correction Of A Misapplication
There are different ways you can correct the misapplication of Bondi Sands Self-Tanning Foam on your skin. However, the two forms of doing that are washing of one’s body.
You can get a hand towel beside you for quick use. All you need is to immerse the towel in lukewarm water that you’ve added detergent inside.
Remove the hand towel and squeeze the towel until it becomes dab. Then, use the dab towel to scrub the region where you mistook the application until the unwanted liquid is removed. Afterward, use a dry cloth to clean the spot before reapplying the tanning substance.
8. Final Step
Normally, you’re to wash the hydrated body at least 1hr after the application, but you can extend the time to 6hrs to get better coloration on one’s skin. Also, you’d really need to reapply 30 minutes after washing off the first application to get a deeper tan.
The washing of your body shouldn’t be done with soap or a sponge. Rather, you can use warm water to shower while you pat the whole body until it becomes dry.
How Long Do I Leave Bondi Sands Foam On For?
Wait between a period of 1hr and 6hr, depending on what you’re expecting as the outcome. Wait longer if you want to get a radiant skin tone. Recall that this is not a tanning lotion, so you’re not to leave it all day long; you’re to clean yourself afterward. Nonetheless, make sure that you drink quite a lot of water while waiting because of the hydration that’s taking place.
Do You Have To Wash Off Bondi Sands Foam?
Yes, you’d need to do that. It’s expedient because it will make you uncomfortable. In fact, it’s after you’ve washed that your body would begin to tan. At that point, you’d still need to be patient anyway so that you can get a good result at the end of the exercise.
How Long Does Bondi Sands Take To Dry?
Almost immediately. It dries up to your skin instantly, and hydration will begin to occur. The only reason the reaction won’t be in seconds is if you didn’t rub the Bondi sands foam to your skin correctly. Besides, that’s why users are urged to rub the tanning substance in a circular motion with the mitt to penetrate one’s skin so well.
Does Bondi Sands Develop After Being Washed Off?
The reaction is gradual. Therefore, it’s worth often applying so that one can attain one’s preferable taste per time. This product doesn’t have a harsh smell, and it’s safe to use anywhere. This won’t get your environment messy. Indeed, that’s why one can use it anywhere, including vacations.
Bondi Sands Light/Medium Foam How Long To Leave On?
You’d need to leave your body after the first application unwashed for, at least, about 1hr to 6hr. However, it can last for three days before the tan will fade off. Nevertheless, that’s if one is reasonably maintaining themselves.
Bondi Sands Is Ultra-Dark; How Long To eave on?
Note that you can apply a Bondi Sands foam twice to get a deep tan, especially the ultra-dark type. Probably, you can get the second round washed off at your own preferred time. Besides, it’s your consistency that will maintain the awe of a tan.
How long does Bondi Sands last?
Typically three days or a few days more. Furthermore, your diligence in the preparation of the tanning is necessary. If you prepare your skin correctly before applying the self-tanner, then the tan will be even and it’ll last. To make the whole exercise easier, take the self-tanner to an expert in a saloon or so for the proper application. The result will be way tangible by doing this. Just try it!
Final Verdict
That’s how to use Bondi sands self-tanning foam ideally to get a great result. You can depend on the information stated here for any of the varieties that the company has earned. Mind you: You’ll always need to exfoliate before you can get a positive result from this.