It is important to check the instructions on your self tanner before you apply it to your body.
That’s why we take the pains to educate you on the steps to apply each brand of self tanners individually. This article is about Bondi Sands. The brand is one of the most effective and popular self tanners. It has many users, and at the same time, we have been getting a lot of questions about how to apply it the right way.
So, we have given the required steps below. Ensure you follow it to the letter. Why do you think people who apply the same self tanners do not get the same results? There are two reasons involved. First, different people have different skin compositions. Secondly, some people follow the application instructions better than others.
So, if you want to get the best results from Bondi Sands, you need to follow the steps listed below. That said, let’s get into the nitty-gritty of the issue now.
How To Apply A Fake Tan Of Bondi Sands? 6 Easy Steps
You’ve just taken delivery of your Bondi Sands self tanner. That’s great. Now, let’s inform you on how to apply it to get great results.
Step 1 – Take The Time To Study The Instructions On It
Whenever you receive any product, the most important thing to do is to go through the instructions by the manufacturer. No one understands a product like its manufacturer. So, it is necessary to study the instructions given by the brand.
Step 2 – Shave Your Body
When you’re ready to apply the tanner, you need to shave your body first. Remove all the hair on your body to allow the tanner to penetrate well. However, you should not shave and apply the tanner on the same day. You’re likely to end up with clogged pores.
It is better to shave your hair a day or two before you apply the self tanner. Some people prefer to shave at night, before bedtime and self tan the following morning. This is a good idea too. Here’s the thing, once you shave your hair, your pores are likely to widen up.
With wider pores, the self tanner will end up in the pores, and cause dots to appear all over your body. But if you wait for at least 10 hours after shaving, you’ll give the pores enough time to close. Then you can apply the self tanner.
Step 3 – Exfoliate Your Skin
After shaving, it is also necessary to exfoliate your skin too. Dead skin cells and impurities can prevent your tanner from getting deep into your skin. So, after shaving your skin, you need to exfoliate it before you apply the Bondi Sands self tanner.
Step 4 – Apply The Tanner
After shaving and exfoliating your skin, you can now apply the tanner. We will advise you to apply it with either a mitt or a glove. Although you can also apply it with your bare hands, we don’t want you to do that. It is easier to apply the right quantity with a mitt than with your hands.
Divide your body into the following sections – Face, neck, torso, legs, and hands. Apply the tanner one section at a time. You may want to apply it in the order above. However, it is not compulsory. You can apply it in any order, but the hands should be the last because you have to pull out the mitt or gloves from your hands before you can apply it to your hand.
Step 5 – Wait For It To Dry Up
Bondi Sands takes less than 30 minutes to dry up. After the application, wait for about half an hour before you wear your clothes. Since the tanner is yet to develop completely after 30 minutes, you can only wear loose clothes. Tight clothes can rub it off.
At this time, don’t take a shower. Water could wash it off too. Even sweat can wash it off if it has not developed fully. So, avoid activities that will make you sweat. It takes about 5 to 7 hours for Bondi Sands to develop fully. After 7 hours, you can wear tight clothes and take a shower.
Step 6 – Moisturize Your Skin
You must moisturize your skin every day after the application of a self tanner. This will help to maintain your tan. It will also make the tan fade evenly. Even if your skin isn’t tanned, it is necessary to keep it moisturized. Dry skin is prone to a lot of skin diseases.
How Long Do You Leave Bondi Sands Fake Tan On?
You have to leave it on for up to 7 hours before you take your shower or wear tight clothes. It takes about 5 to 7 hours to develop fully. If you take your shower before then, you may wash off some of the tan, leaving you with uneven patches of tanner.
You should also avoid whatever can make you sweat before the 7-hour timeline lapses. This is because sweat has the ability to wash off the tanner. In addition, you can leave it on for 6 to 8 days. Even if you don’t do anything about it, the tan will begin to fade gradually after 6 days.
Should I Moisturize Before Applying Bondi Sands?
Yes, it is a great idea. You can moisturize your skin before you apply a self tanner. And you should apply a moisturizer every day after you apply the self tanner. Without a moisturizer, your skin could dry up and turn your tan into patches. Also, applying a moisturizer will make the tan last a little longer. Generally, your skin has to remain hydrated all the time.
How Long Does It Take Bondi Sands To Develop?
It takes about 5 to 7 hours for Bondi Sands to develop fully. So, you need to wait for that long before you can take a shower or go around in a tight outfit. Taking a shower in less than 5 hours after applying the tanner may result in your tanner washing off.
Also, if you wear tight clothes before the 5-hour timeline lapses, you risk your clothes getting stained. One more thing to avoid until after 5 hours is a rigorous activity. It can make you sweat, and your sweat can wash the tanner off.
Final Thoughts
We have tested Bondi Sands, and we recommend the product. However, you must follow the steps discussed above to get the desired results. More importantly, you need to wait for 5 hours for the tanner to develop fully before you take a shower.